How to Remove a Door Panel From a 1990 Acura Legend Coupe
- 1). Pull the interior door handle open and pry the trim cover behind the handle out of its socket with the tip of the pocket screwdriver. Remove the two screws behind the trim cover with the Phillips screwdriver.
- 2). Pry out the trim covers on the leading edge of the door panel and in the door pull cavity with the pocket screwdriver. Remove the screws behind each cover with the Phillips screwdriver.
- 3). Slide the tip of the trim tool between the upper-leading edge of the door panel and the door skin. Pry the trim pin located there out of the door with the trim tool.
- 4). Move along the edge of the door panel, down the leading end, across the bottom and up the trailing edge, removing the trim pins as you encounter them along the way.
- 5). Pry the inside door handle bezel out of the door with the trim tool. Lift the door panel off the door with both hands, slide the handle bezel through the handle opening in the panel and then move the door panel away from the door.
Source...