- 1). Clean the damaged window with soap, water and a soft cloth. Dry it with another cloth.
- 2). Remove loose shards of glass within the crack if you can. Put your goggles on and use the corner of the razor blade to pry the loose pieces out.
- 3). Prepare the resin syringe by opening the resin bottle, placing the syringe tip in the bottle and drawing back on the rubber end of the syringe until it is full.
- 4). Fill the crack completely. Gently press the syringe end forward until the resin comes out slowly. Work slowly so the resin does not go everywhere.
- 5). Let the resin repair dry for a few hours, and then scrape off the excess dried resin.
Source...