- 1). Put the tabs of the bag mounting post into the slots on the rear of the hitch plate. The ends of the long rod on the mounting post fit into the small holes of the cargo mounts. These holes are located directly behind the driver's seat.
- 2). Slide the cargo pin into the hole in the mounting post. Put the smaller spring locking pin into the hole in the cargo pin.
- 3). Mount the bags onto the mounting post. There are holes in the top of the bag that slide onto the tabs at the top of the mounting post. Close the hopper top which will cover the open tops of the bags. Fasten it down with the latch.
Source...