- 1). Remove the inner valve core from the wheel's valve stem, using a Schrader valve wrench.
- 2). Mount the tire onto the wheel, using tire irons.
- 3). Rotate the tire around the wheel until the white balance dot printed on the tire's sidewall is aligned with the wheel's valve stem.
- 4). Inflate the tire through the valve stem, using an air compressor. Stop inflating the tire after two loud pops are heard, signifying that the tire has been seated onto the wheel.
- 5). Deflate the tire slightly, allowing the air to rush out of the valve stem.
- 6). Screw the inner valve core into the wheel's valve stem, using a Schrader valve wrench.
- 7). Reinflate the tire to the desired tire pressure, using compressed air.
Source...