- 1). Insert the battery pack's power cord into a wall outlet, and then insert the USB end into the charger port on the FD75.
- 2). Connect the battery pack to the battery charger. On the bottom of the battery pack you will see a small arrow. This arrow should be on the bottom of the battery pack, facing you, when it is on the charger. When the battery pack is properly connected to the charger, it will slide and snap into place.
- 3). Check to make sure that the charge lamp on the batter charger is lit orange. The lamp indicator is just above the battery on the left hand side of the charger. When the light is lit orange, the battery is charging properly.
- 4). Check the charge light to see if it has gone out. The battery usually takes 2 1/2 hours to charge. This is considered a "normal" charge. For a full charge, leave the battery on the charger for another hour after the charge light goes out. This will give the battery a "full" charge.
- 5). Remove the battery from the battery charger by sliding the battery pack up and pulling it off the charger.
Source...