Directions to Set Up an Intex Sun & Sand Pool
- 1). Spread the ground cloth on a level area free of sharp objects including rocks and sticks. These may damage the pool.
- 2). Find the drain valve toward the draining spot when laying out the ground cloth.
- 3). Find the hose connections nearest to your electrical source.
- 4). Lay out the blue sides so it sits as flat as possible.
- 5). Move the top ring so it sits outside the wall lining.
- 6). Inflate the top ring using a manual hand pump.
- 7). Position the black plugs inside the filter pump outlets if you are not using a filter pump. If you plan to use a filter pump, hook up the hoses to the outlets based on the instructions provided with your pump.
- 8). Insert the drain plug inside the pool.
- 9). Screw the drain cap on the outside of the pool.
- 10
Fill the pool with 1 inch of water using a water hose. - 11
Continue filling the pool as long as it appears level. If it does not appear level, drain the pool and move it to another location or dig out enough dirt and grass underneath the pool to level the area. - 12
Push out any wrinkles on the bottom liner while you are filling the pool with water. - 13
Continue filling the pool with water until it reaches the inflated ring's bottom.
Source...